Vlieseline H640 Medium Loft Pre-Cut Iron-On Fusible Fleece - 90 x 100cm (1)

Each pack contains a pre-cut piece of fleece, measuring 90cm x 100cm. If you order more than one, you'll receive separate packs of this size - not a continuous length.

Perfect for smaller sewing projects, this pre-cut pack of Vlieseline H640 iron-on fusible fleece will be an essential in your sewing kit! With a medium-weight loft, this iron-on fleece can be used for projects such as quilts, adding warmth to clothing, or adding stability to bags! Supplied in an individual pack.

Fleece Composition: 30% Recycled Polyester, 70% Polyester
Weight: 132gsm
Length & Width: 90cm x 100cm
Care Instructions: Gentle Machine wash at 40°C with a mild detergent. Do not tumble dry. Dry flat. Iron on a high temperature. Dry cleanable.
Recommended Machine Needle: Ballpoint 80/12 to 90/14

How to Use Fusible Fleece 

• Cut to Size
• Cut the fleece slightly smaller than your fabric piece if sewing into seams (to reduce bulk).
• Place the adhesive (rough) side of the fleece against the wrong side of your fabric.
• Lay a damp pressing cloth or tea towel on top to protect the fabric and help with fusing.
• With your iron set to high heat (wool/cotton setting, no steam), press down firmly for about 15 seconds.
• Do not slide the iron — just press and lift, moving section by section.
• Allow the fabric and fleece to cool completely on a flat surface before handling. This sets the bond.

Tips:

Always test on a scrap first — especially with delicate fabrics.