Vlieseline H630 Light Loft Pre-Cut Iron-On Fusible Fleece - 90 x 100cm (1)

Each pack contains a pre-cut piece of fleece, measuring 90cm x 100cm. If you order more than one, you'll receive separate packs of this size - not a continuous length.

Add stability to your sewing projects with this pre-cut pack of Vlieseline H630 iron-on fusible fleece! Perfect for applique, patchwork, insulating clothing, or quilting small projects, this handy pack of fusible fleece will be an essential in your sewing kit! Supplied in an individual pack.

Fleece Composition: 30% Recycled Polyester, 70% Polyester
Weight: 86gsm
Length & Width: 90cm x 100cm
Care Instructions: Gentle Machine wash at 40°C with a mild detergent. Do not tumble dry. Dry flat. Iron on a high temperature. Dry cleanable.
Recommended Machine Needle: Ballpoint 80/12 to 90/14

How to Use Fusible Fleece 

• Cut to Size
• Cut the fleece slightly smaller than your fabric piece if sewing into seams (to reduce bulk).
• Place the adhesive (rough) side of the fleece against the wrong side of your fabric.
• Lay a damp pressing cloth or tea towel on top to protect the fabric and help with fusing.
• With your iron set to high heat (wool/cotton setting, no steam), press down firmly for about 15 seconds.
• Do not slide the iron — just press and lift, moving section by section.
• Allow the fabric and fleece to cool completely on a flat surface before handling. This sets the bond.

Tips:

Always test on a scrap first — especially with delicate fabrics.